Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving all of Virginia

Sidewalk & Walkway Cleaning for Exposed Aggregate in Virginia

Moderate-pressure wash for exposed aggregate. Walkway, front path and sidewalk cleaning that removes slippery growth, gum and grime. Typical cost $100-$250.

When we handle sidewalk & walkway cleaning for exposed aggregate in Virginia, it comes down to three things: protecting your plants and property, cleaning with the right method, and walking the job with you at the end. On exposed aggregate, the method we use is moderate-pressure wash.

Method and pressure

Moderate-pressure washCleaning method
Usually 1,500-2,500 PSI with a surface cleanerPressure

Cleaning solution: A concrete pre-treatment and degreaser as needed.

What to know about cleaning exposed aggregate

Exposed aggregate concrete has stones showing at the surface. Too much pressure can loosen stones at the edges, and the surface looks best when cleaned and resealed.

Avoid: High pressure at edges and cracks, which can pop out aggregate.

How often: Clean yearly; reseal every 2-3 years.

Is it time for sidewalk & walkway cleaning for exposed aggregate?

  • Slippery paths after rain
  • Green or black growth along shaded edges
  • Gum, leaf stains or rust spots
  • Uneven, blotchy color

What causes the dirt and stains

  • Shade and moisture along the house
  • Foot traffic and dropped food or gum
  • Leaves and berries that stain
  • Sprinkler overspray

Easy upkeep between cleanings

  • Sweep away leaves before they stain
  • Scrub small slippery patches with a stiff brush and a deck or patio cleaner
  • Trim plants that keep paths shaded and damp

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Why more pressure isn’t better

  • Slipping on wet, treated surfaces
  • Water and debris sprayed onto doors, windows and cars
  • Lifting loose joint material between slabs

Our process for sidewalk & walkway cleaning for exposed aggregate

  1. Sweep and inspect
  2. Pre-treat growth and stains
  3. Clean with a surface cleaner
  4. Detail edges and steps
  5. Rinse and post-treat

Typical sidewalk & walkway cleaning for exposed aggregate prices

$100-$250Typical range for a typical front walk and side paths
About 1 hourTypical time on site
Once a yearRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for exposed aggregate

Local sidewalk & walkway cleaning for exposed aggregate for Virginia

In Virginia, concrete has to deal with summer mildew and winter salt and freeze-thaw cycles. Annual cleaning and a sealer every few years help it last.

Spring pollen season in Virginia coats houses, cars, screens and patios in a yellow-green film, and pollen gives mildew something to feed on. Many homeowners book their wash after pollen season ends so the house stays clean longer.

Red clay soil is common in parts of Virginia. Rain splashes it onto the bottom of the siding, walls and walkways, and its iron-rich color can stain light surfaces. It usually needs a dedicated clay or rust cleaner rather than pressure alone.

We cover 247 cities and towns across Virginia. Find sidewalk & walkway cleaning for exposed aggregate in your city:

Sidewalk & Walkway Cleaning for Exposed Aggregate: frequently asked questions

How much does sidewalk & walkway cleaning for exposed aggregate cost in Virginia?

Sidewalk & Walkway Cleaning for Exposed Aggregate typically costs $100-$250 for a typical front walk and side paths, and usually takes About 1 hour. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for sidewalk & walkway cleaning for exposed aggregate?

For exposed aggregate: usually 1,500-2,500 PSI with a surface cleaner. What we avoid: high pressure at edges and cracks, which can pop out aggregate. We keep the pressure even and controlled, with the right tools for the surface.

Is sidewalk & walkway cleaning for exposed aggregate safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule sidewalk & walkway cleaning for exposed aggregate?

Clean yearly; reseal every 2-3 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Virginia

Driveway Cleaning for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$400

Deck Restoration & Staining for Pressure-Treated Wood

Low-pressure wash. Pressure-treated pine is the most common deck and fence wood.

Typical $800-$2,500

House Washing for Log Homes

Low-pressure wash. Log homes need regular cleaning to keep mildew and insects from settling into checks and cracks, and the logs must be clean and dry before a new stain goes on.

Typical $300-$700

Graffiti Removal for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $200-$800

Pressure Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$600

Soft Washing for Vinyl Siding

Soft wash. Vinyl is the most common siding in the U.S.

Typical $300-$800

Pressure Washing for Flagstone

Low-to-moderate pressure wash. Flagstone covers several stones, including sandstone, slate, bluestone and limestone, and they react differently to pressure and chemicals.

Typical $150-$600

Gutter Cleaning

Clearing leaves and debris from gutters and flushing downspouts so water drains away from the house.

Typical $150-$350

Soft Washing for Wood Siding

Soft wash. Painted and stained wood siding grows mildew and loses its finish faster on the shaded and weather-facing sides.

Typical $300-$800

Soft Washing for Stone & Stone Veneer

Low-pressure wash. Natural stone and manufactured stone veneer vary a lot.

Typical $300-$800

Screen Enclosure & Lanai Cleaning

Cleaning pool cages, screen rooms and lanais, including the frame, screens and the deck below.

Typical $200-$500

HOA & Apartment Pressure Washing for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $800-$5,000

Ready for a cleaner home or business?

Get a free pressure washing quote in Virginia. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote