Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving all of Virginia

Roof Cleaning for Metal Roofs in Virginia

Soft wash for metal roofs. Soft wash roof cleaning that removes black streaks, moss and lichen without the granule damage pressure washing causes. Typical cost $400-$1,000.

Roof Cleaning for Metal Roofs is one of the jobs we do most often in Virginia. Typical jobs cost $400-$1,000, and you approve the price before we begin. On metal roofs, the method we use is soft wash.

How we clean it

Soft washCleaning method
Soft wash, typically under 500 PSIPressure

Cleaning solution: A mild detergent or soft wash solution suitable for painted metal.

Caring for metal roofs

Painted metal roofs collect dirt, mildew and oxidation chalk. A soft wash cleans them without damaging the coating, and rinsing off salt film matters on coastal homes.

Avoid: High pressure at the seams and fasteners, and abrasive or strongly acidic cleaners that dull the paint.

How often: Every 2-4 years.

When to book roof cleaning for metal roofs

  • Black or dark streaks running down the roof
  • Green moss or lichen spots, often on the north side
  • Roof looks older than it is
  • Moss lifting the edges of shingles
  • A home inspector or insurer has noted roof growth

Where the grime comes from

  • Roof algae (often Gloeocapsa magma) spread by wind
  • Shade from trees and the north-facing side staying damp
  • Debris piles in valleys that hold moisture
  • Moss and lichen that root into the roof surface

Easy upkeep between cleanings

  • Keep valleys and gutters clear of leaves and pine needles
  • Trim branches to let in sun and air
  • Consider zinc or copper strips near the ridge to slow regrowth
  • Look from the ground with binoculars instead of climbing on the roof

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Why more pressure isn’t better

  • Pressure washing strips granules and can void a shingle warranty
  • Falls from a slippery, wet roof
  • Chemical runoff that burns plants below
  • Water forced under shingles and flashing

How we handle roof cleaning for metal roofs

  1. Check the roof type, pitch and condition from the ground and ladder
  2. Pre-wet and protect plants and cover sensitive areas
  3. Apply a soft wash solution suited to the roofing material
  4. Let it work, then rinse gently or let rain finish the job as recommended
  5. Rinse gutters, downspouts and plants and check the results

Roof Cleaning for Metal Roofs cost in Virginia

$400-$1,000Typical range for a typical single-story or two-story home
2-4 hoursTypical time on site
Every 3-5 years, or when streaks returnRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for metal roofs

Serving Virginia and nearby towns

Black algae streaks are common on asphalt roofs in Virginia, particularly on north-facing slopes and under trees. Soft washing removes them without stripping the granules that protect the shingles.

Near the coast, salt air leaves a film on siding, windows, screens and railings that dulls finishes and speeds up corrosion on metal. Regular rinsing and washing help protect them.

We cover 247 cities and towns across Virginia. Find roof cleaning for metal roofs in your city:

Roof Cleaning for Metal Roofs: frequently asked questions

How much does roof cleaning for metal roofs cost in Virginia?

Roof Cleaning for Metal Roofs typically costs $400-$1,000 for a typical single-story or two-story home, and usually takes 2-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for roof cleaning for metal roofs?

For metal roofs: soft wash, typically under 500 PSI. What we avoid: high pressure at the seams and fasteners, and abrasive or strongly acidic cleaners that dull the paint. The cleaning solution does most of the work, followed by a gentle rinse.

Is roof cleaning for metal roofs safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule roof cleaning for metal roofs?

Every 2-4 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Virginia

Driveway Cleaning for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$400

Deck Restoration & Staining for Pressure-Treated Wood

Low-pressure wash. Pressure-treated pine is the most common deck and fence wood.

Typical $800-$2,500

House Washing for Log Homes

Low-pressure wash. Log homes need regular cleaning to keep mildew and insects from settling into checks and cracks, and the logs must be clean and dry before a new stain goes on.

Typical $300-$700

Graffiti Removal for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $200-$800

Pressure Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$600

Soft Washing for Vinyl Siding

Soft wash. Vinyl is the most common siding in the U.S.

Typical $300-$800

Pressure Washing for Flagstone

Low-to-moderate pressure wash. Flagstone covers several stones, including sandstone, slate, bluestone and limestone, and they react differently to pressure and chemicals.

Typical $150-$600

Gutter Cleaning

Clearing leaves and debris from gutters and flushing downspouts so water drains away from the house.

Typical $150-$350

Soft Washing for Wood Siding

Soft wash. Painted and stained wood siding grows mildew and loses its finish faster on the shaded and weather-facing sides.

Typical $300-$800

Soft Washing for Stone & Stone Veneer

Low-pressure wash. Natural stone and manufactured stone veneer vary a lot.

Typical $300-$800

Screen Enclosure & Lanai Cleaning

Cleaning pool cages, screen rooms and lanais, including the frame, screens and the deck below.

Typical $200-$500

HOA & Apartment Pressure Washing for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $800-$5,000

Ready for a cleaner home or business?

Get a free pressure washing quote in Virginia. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote