Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving all of Virginia

Pre-Paint Washing for Aluminum Siding in Virginia

Soft wash for aluminum siding. Washing siding and trim before painting or staining so new paint bonds to a clean surface. Typical cost $250-$600.

Looking for pre-paint washing for aluminum siding in Virginia? We look at the surface first, choose the right method and pressure for it, and give you a price before any work starts. For aluminum siding, that means soft wash.

Method and pressure

Soft washCleaning method
Soft wash, typically under 500 PSIPressure

Cleaning solution: A gentle detergent solution; strong cleaners can dull the finish further.

What to know about cleaning aluminum siding

Older aluminum siding often has a chalky, oxidized finish. Washing removes dirt and mildew but also removes loose chalk, which can make faded panels look patchy. If the finish is badly oxidized, washing is usually the prep step before repainting.

Avoid: High pressure, which dents thin panels and strips chalky paint unevenly.

How often: Every 1-2 years.

Signs you need pre-paint washing for aluminum siding

  • You're about to paint or stain the house
  • Chalky residue comes off on your hand
  • Mildew or dirt under the old paint

Where the grime comes from

  • Paint chalking as it ages
  • Mildew that will grow through new paint if not killed
  • Dirt that weakens adhesion

What you can do yourself

  • Ask your painter what prep they need
  • Allow siding to dry for the time the paint maker recommends before painting

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Why more pressure isn’t better

  • Painting over mildew, which bleeds through
  • Too much pressure that damages wood or drives water into the wall
  • Painting before the wood is dry

What happens on the day

  1. Coordinate with your painter
  2. Protect plants and fixtures
  3. Kill mildew and wash the surface
  4. Remove loose chalk and dirt
  5. Leave the house to dry before painting

Pre-Paint Washing for Aluminum Siding cost in Virginia

$250-$600Typical range for a typical home exterior
2-4 hours plus dry timeTypical time on site
Before every exterior paint jobRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for aluminum siding

Local pre-paint washing for aluminum siding for Virginia

Humid summers in Virginia grow green algae and black mildew on the shaded sides of homes, especially on vinyl and painted wood. A soft wash kills the growth rather than just knocking it off, so the siding stays clean longer.

Near the coast, salt air leaves a film on siding, windows, screens and railings that dulls finishes and speeds up corrosion on metal. Regular rinsing and washing help protect them.

Spring pollen season in Virginia coats houses, cars, screens and patios in a yellow-green film, and pollen gives mildew something to feed on. Many homeowners book their wash after pollen season ends so the house stays clean longer.

Red clay soil is common in parts of Virginia. Rain splashes it onto the bottom of the siding, walls and walkways, and its iron-rich color can stain light surfaces. It usually needs a dedicated clay or rust cleaner rather than pressure alone.

We cover 247 cities and towns across Virginia. Find pre-paint washing for aluminum siding in your city:

Pre-Paint Washing for Aluminum Siding: frequently asked questions

How much does pre-paint washing for aluminum siding cost in Virginia?

Pre-Paint Washing for Aluminum Siding typically costs $250-$600 for a typical home exterior, and usually takes 2-4 hours plus dry time. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for pre-paint washing for aluminum siding?

For aluminum siding: soft wash, typically under 500 PSI. What we avoid: high pressure, which dents thin panels and strips chalky paint unevenly. The cleaning solution does most of the work, followed by a gentle rinse.

Is pre-paint washing for aluminum siding safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule pre-paint washing for aluminum siding?

Every 1-2 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Virginia

Driveway Cleaning for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$400

Deck Restoration & Staining for Pressure-Treated Wood

Low-pressure wash. Pressure-treated pine is the most common deck and fence wood.

Typical $800-$2,500

House Washing for Log Homes

Low-pressure wash. Log homes need regular cleaning to keep mildew and insects from settling into checks and cracks, and the logs must be clean and dry before a new stain goes on.

Typical $300-$700

Graffiti Removal for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $200-$800

Pressure Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$600

Soft Washing for Vinyl Siding

Soft wash. Vinyl is the most common siding in the U.S.

Typical $300-$800

Pressure Washing for Flagstone

Low-to-moderate pressure wash. Flagstone covers several stones, including sandstone, slate, bluestone and limestone, and they react differently to pressure and chemicals.

Typical $150-$600

Gutter Cleaning

Clearing leaves and debris from gutters and flushing downspouts so water drains away from the house.

Typical $150-$350

Soft Washing for Wood Siding

Soft wash. Painted and stained wood siding grows mildew and loses its finish faster on the shaded and weather-facing sides.

Typical $300-$800

Soft Washing for Stone & Stone Veneer

Low-pressure wash. Natural stone and manufactured stone veneer vary a lot.

Typical $300-$800

Screen Enclosure & Lanai Cleaning

Cleaning pool cages, screen rooms and lanais, including the frame, screens and the deck below.

Typical $200-$500

HOA & Apartment Pressure Washing for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $800-$5,000

Ready for a cleaner home or business?

Get a free pressure washing quote in Virginia. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote